BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c3000 optional kvm module

David S Reynolds
Occasional Visitor

c3000 optional kvm module

I installed the optional kvm module but can't figure out how to get it to work. There is no documentation on this in the c3000 user guide. I tried connecting to a kvm switch but get no connection. There is a selection on the insight display for KVM but it just goes to a blank screen when selected. If anyone has gotten this to work please help me.

Thanks,

Scott
4 REPLIES
Raghuarch
Honored Contributor

Re: c3000 optional kvm module

Hi David,

you need to do a change in the Active OA page.
Select the rear USB enable it. OA will restart after that you can use the KVM module.
Douglas Munn
Occasional Visitor

Re: c3000 optional kvm module

I also have a C3000. I do not know what you refer to about enabling USB in the OA. Where would this be found?
Douglas Munn
Occasional Visitor

Re: c3000 optional kvm module

Is the KVM module designed only to be plugged into other KVMs or can it be used directly with a display, keyboard and mouse?

I can't find any docs on it.
Ecu2015
Occasional Visitor

Re: c3000 optional kvm module