HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 AC to DC Power Conversion question.

 
chuckk281
Trusted Contributor

c7000 AC to DC Power Conversion question.

Hilton had a customer power question:

 

***************

 

Just wanted to confirm that converting a c7000 from AC to DC is as simple as converting from single phase to 3 phase, i.e. no funnies

 

1 ) Change out the power module ( 544661-001 or 544661-002 )

2 ) Change out the power supplies ( AH332A )

3 ) Set PDU type to DC in the OA CLI

 

**************

 

Reply from John in the Telco team:

 

************

 

Change the Power Input Module to DC (AH331A), swap power supplies (AH332A).

 

You will need a 80 amp @-48VDC feed (two lug) for each power supply, you will also need a chassis ground to match local code requirements.

 

When finished it should look like this.

 

 DC Power Set-up.jpg

 

The ISS Telco team can help you with this, as required.

 

****************

 

Comments or questions?