BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 'Enclosure Ambient Temperature' wrong after FW upgrade

Sysxp
Occasional Visitor

c7000 'Enclosure Ambient Temperature' wrong after FW upgrade

Hello!

I have just upgraded my c7000 firmware from 2.41 to 2.60. I also updated blades with FDT cd.

My server room have 19C temperature.
After the upgrade 'Enclosure Ambient Temperature' now shows "30°C / 86°F", but it is still 19C in the room. It was showing the exact 19C before the upgrade. Also, if I lower the temperature to 16C, it still shows 30C (or 29C rarely).
The blade 'Ambient sensor' shows the right 19C.
I rebooted OA several times but it is not helped.

Am I done anything wrong?
How to make it to show the correct temperature once again?

Thank you!
2 REPLIES
Sysxp
Occasional Visitor

Re: c7000 'Enclosure Ambient Temperature' wrong after FW upgrade

Looks like its somehow "calibrate" itself, and now show 20C.

Still, looks like it become inaccurate after the upgrade.
Sysxp
Occasional Visitor

Re: c7000 'Enclosure Ambient Temperature' wrong after FW upgrade

The problem stil persists, the "Enclosure Ambient Temperature" lies from time to time. It is showing about 10C more, than it should.

Is there a way to correct this?