HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 Enclosure power redundancy questions

 
chuckk281
Trusted Contributor

c7000 Enclosure power redundancy questions

Alistair wanted clarification on what it means for the BladeSystem enclosure power setting is set to "AC Redundant":

 

***************

 

C7000 power supply redundancy is set to AC redundant, when power supplies fail or lost one AC power feed.

The total power capacity is below c7000 needed power at 100% loading, so I know  the Onboard Administrator (OA) will throttle CPU performance.

which conditions OA will further shut down blade servers?

which conditions OA will not permit to power on blade servers?

 

Please kindly help, thank you.

 

***********

 

Input from Nilesh:

 

**************

 

The primary condition that OA checks is power capacity > power allocated.

if this is not met the OA will not allow powering a blade ON.

 

Hope this helps.

 

***********

 

Other comments?