BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 G2 BL460c G6 ILO Virtual Media Problem

nire
Occasional Visitor

c7000 G2 BL460c G6 ILO Virtual Media Problem

I am wondering if anyone has run into this...When I mount an ISO (have tried with and w/o smartstart, 3 different W2K3 and ESX) to install any OS on one of our new blades, it gets a portion of the way through the install and then the install just fails. ESX install reports an IO Error and can't complete the install. It is almost like when someone ejects a CD from a physical CD drive in the middle of the install. We have other enclosures and have not run into this problem ever...Firmware is updated, NICs are set to 100/full (same on the switch). Support is researching, but I am at a loss... Any help would be appreciated!
4 REPLIES
JKytsi
Honored Contributor

Re: c7000 G2 BL460c G6 ILO Virtual Media Problem

"NICs are set to 100/full" ... What is set to 100/full ? OA port ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
nire
Occasional Visitor

Re: c7000 G2 BL460c G6 ILO Virtual Media Problem

OA and ILO.
DragomirAtea
Trusted Contributor

Re: c7000 G2 BL460c G6 ILO Virtual Media Problem

Hi!

If youre using either Windows Vista or Windows 7, youll get theese problems.

I'm doing all my taska to an ILO trough a virtual machine running Woindows XP.

Regards
Dragomir
nire
Occasional Visitor

Re: c7000 G2 BL460c G6 ILO Virtual Media Problem

Hi there! I am using a workstation that has Windows XP installed with IE6. That is the crazy thing!