BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 & hyper-v : ip addresses & subnets

Aaron.S
Frequent Advisor

c7000 & hyper-v : ip addresses & subnets

Hello,
have a c7000 encosure with ~ 9 half / full height blades in it.

Three of those blades are running W2K8r2 and Hyper-V in the 192.168.0.x subnet.

All three of these Hyper-V blades only have access to interconnect bays 1-6.

Interconnect bay 7-8 have a vlan to subnet 192.168.1.x. (Which 5 blades in ESX clusters have access due to appropriate mezzanine configurations)

Despite the Hyper-V blades being configured with static IP addresses in the 192.168.0.x subnet, and having their default gateway pointing to 192.168.0.1, the VMs in hyper-v are picking up addresses from the 192.168.1.x subnet.

I have no idea why this is happening and would greatly appreciate help resolving the matter.

Thank you,


-Aaron