BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 and Virtual Connect Firmware upgrade

 
MP2k
Occasional Contributor

c7000 and Virtual Connect Firmware upgrade

any upgrade procedures for C7000 Firmware Upgrade w. Virtual Connects. OA then Virtual COnnect? Can Virtual connect gro from 3.6 to 4.3 in one upgrade? Do blades really need SPP installed?

2 REPLIES
msh_it
Regular Advisor

Re: c7000 and Virtual Connect Firmware upgrade

Hi

 

I usually upgrade OA then VC, if you are upgrading from 3.6 to 4.30 then I prefer two phases atlease, 3.60 to 4.0 then 4.0 to 4.30. for the blade it is recommended to be upgraded as well

check this link for VC firmware upgrade procedures

http://h30499.www3.hp.com/t5/HP-BladeSystem-Virtual-Connect/Steps-and-prerequisite-before-firmware-update-Virtual-Connect/m-p/6683325#M3657

 

-------------------------------

msh_it | UAE | AbuDhabi

If you feel this was helpful please click the KUDOS! Below!
Server-Support
Super Advisor

Re: c7000 and Virtual Connect Firmware upgrade

Can that upgrade be done without causing any downtime to the running blade server assuming we got 2x VC modules ?