HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 enclsosure and 2x1x16 KVM

 
SOLVED
Go to solution
riperez
Occasional Advisor

c7000 enclsosure and 2x1x16 KVM

Hello,

I have a customer that wants to attach a 2x1x16 KVM to their c7000 enclosure. They have Virtual Connect Ethernet switches in bays 1&2. Can they simply attach the KVM via the USB port on the Virtual connect? I am trying to convince them to use iLO and the OA to manage their enclosures, but they would like to see if using the KVM makes sense.

What would be the best practice for them?
2 REPLIES
David Claypool
Honored Contributor
Solution

Re: c7000 enclsosure and 2x1x16 KVM

Virtual Connect Ethernet does not have a USB port. You must mean the Onboard Administrator. The USB port on Onboard Administrator is for attaching storage devices to OA that then can be mapped to a blade through iLO Virtual Media. You cannot attach a KVM here.
riperez
Occasional Advisor

Re: c7000 enclsosure and 2x1x16 KVM

Good to know.
I convinced my customer to use iLO2 to mange the servers through the remote graphical console.