HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 iLO3/G7 blade issue

 
Hwilli
Occasional Advisor

c7000 iLO3/G7 blade issue

I am currently in the process of writing documetation for my companies operations team.

We have a c7000 Bladeserver that is populated with both G6 cards running iLO2 and G7 cards running iLO3.

The administration links for the G6 cards are all functional, but only the "Web Administration" link is functional on the G7 cards.

I noticed this when updating firmware, and documenting the process. This is not a huge concern, but more of a curiosity.

The G7 cards are running firmware I27 09/30/2010. The Enclosure is running 1.7 and 2.4.3 respectivly.

Thank you,

Howard Williams
2 REPLIES
David Claypool
Honored Contributor

Re: c7000 iLO3/G7 blade issue

See http://www.hp.com/go/bladesystemupdates

OA firmware 3.11 is the first that supported the G7 blades.
Hwilli
Occasional Advisor

Re: c7000 iLO3/G7 blade issue

Thank you very much for the reply.