HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

c7000 interconnect bays

 
David Arnau
Occasional Visitor

c7000 interconnect bays

Hello.

In my company we are implementing a platform using two c7000 enclosures and 20 bl460 servers, and we have a doubt about interconnect bays. In the c7000 specs says:

"Up to 4 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously within the enclosure."

Based on this, is possible e.g., to have running in the same c7000 enclosure two Passthru modules and four HP GbE2c switches?

It the answer is afirmative, can I map one NIC of a Blade to a port in the Passthru, and the second NIC to a port in a switch?

Thank you in advance.
1 REPLY
Raghuarch
Honored Contributor

Re: c7000 interconnect bays

is possible e.g., to have running in the same c7000 enclosure two Passthru modules and four HP GbE2c switches?
YES

can I map one NIC of a Blade to a port in the Passthru, and the second NIC to a port in a switch?
YES. Depends on where you have the interconnects.
Refer to port mapping attachment for more details.