BladeSystem - General
1748275 Members
3680 Online
108761 Solutions
New Discussion юеВ

can not ssh to mp port after firmware upgrade

 
Ignite-UX_1
New Member

can not ssh to mp port after firmware upgrade

I was able to ssh to the mp port prior upgrade the firmware on BL860C. After firmware upgraded now I am not able to ssh to the MP. Does anyone know what is the root cause.
3 REPLIES 3
Steven Schweda
Honored Contributor

Re: can not ssh to mp port after firmware upgrade

"I am not able" is not a useful problem
description. What, exactly, did you do?
What, exactly, happened when you did it?

If you used an "ssh" command somewhere, then
adding "-v" to it might provide some useful
information.
Ignite-UX_1
New Member

Re: can not ssh to mp port after firmware upgrade

I was using putty via ssh to ip address of mp.. and I got this error...Server sent disconnect message type 11(by application):"Client Disconnect"
Johnson Punniyalingam
Honored Contributor

Re: can not ssh to mp port after firmware upgrade

>>I was using putty via ssh to ip address of mp.. and I got this error...Server sent disconnect message type 11(by application):"Client Disconnect"<<<

I had this issue before. after firmware upgrade.

request to network team or adminstrator

to reset the switch port settings.

this should slow problem
Problems are common to all, but attitude makes the difference