BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

checking PWWN for Qlogic fibre card

 
Asim_5
Frequent Advisor

checking PWWN for Qlogic fibre card

In windows how will you check through cli the fibre card PWWN like we use ipconfig to check NIC mac address.
In windows can anyone tell the command for it or which utility can be installed in stand alone server having fibre card.
i have dual port fibre card its alone server having fibre installed.
4 REPLIES
Víctor Cespón
Honored Contributor

Re: checking PWWN for Qlogic fibre card

You can use SANsufer for Qlogic cards, and HBAanywhere for Emulex cards, but they are graphical utilities, not CLI.
You have posted this in Bladesystem forum, if the servers are class-C blades, the Onboard Administrator tells you all MACs and WWN of the cards.
And, a 3rd way, if you have already connected the servers to a SAN switch, the name server of the fabric will tell you what WWN is connected on each port.
James ~ Happy Dude
Honored Contributor

Re: checking PWWN for Qlogic fibre card

Asim_5
Frequent Advisor

Re: checking PWWN for Qlogic fibre card

i know these all ways,what about if u have a single server having fc card installed in windows os and you want to know the PWWN for specfic port