HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

connect 2 GbE2c-L2/3 to one cisco: no ping between bl460c servers

 
it61066
Frequent Advisor

connect 2 GbE2c-L2/3 to one cisco: no ping between bl460c servers

Hello,

I have two c7000 with the following configs:

- Enc1: two GbE2c L2/3 switches, 2 bl870c, 2 bl680c, 2 bl460c
- Enc2 (testing): one GbE2c, one bl870c, 2 bl680c

I have configured the GbE2c switches for ufd and teaming. To distribute the load between switches, we have configured the team in failover mode with preference order: a group of servers with preference on GbE2c-Bay1 and others on Bay-2.

Both GbE2c switches are connected to the same cisco switch (one only). We have only one Vlan, one subnet. My problem is:

Servers with preference NIc on Bay-1 cannot ping those on Bay-2 but all clients connected to the cisco switch can ping / connect to any server inside the enclosure.

Any help please?

Thanks.
HPE ASE Proliant & Storage Certified Engineer
Clustering & Virtualization Support (Microsoft & Vmware)