HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

connecting msa1500cs with c3000 blade system via fiber switch

 
David Ichikawa
Occasional Contributor

connecting msa1500cs with c3000 blade system via fiber switch

We just purchased a c3000 blade system kit with 2 half height blades and a brocade 4GB 4/12 SAN switch interconnect module. We would like to attach it to our msa1500 fiber switch (HP Storageworks 4/8 SAN Switch) which currently has one more port available in the zone.

I'm wondering how we need to configure the zoning/domain ID/IP Address to add our c3000 to the existing SAN fabric. Do I need to create another zone? Can the two fiber switches be in the same subnet? Is there any documentation to set this up?

Thanks in advance!