BladeSystem - General
1748159 Members
3855 Online
108758 Solutions
New Discussion юеВ

Re: error encountered when installing Qlogic driver

 
philipho827
Occasional Advisor

error encountered when installing Qlogic driver

Hello folks,

I have a HP C-CLass bl 480c full height blade and in the process of installing the qlogic drivers that i downloaded from this site.

However during the installation i hit the following errors:
[root@pss1db3a hp_qla2x00-2007-10-05a]# ./INSTALL
Installing hp_qla2x00src RPM...

Preparing... ########################################### [100%]

Please install the kernel-devel package

error: %pre(hp_qla2x00src-8.01.07.25-1.noarch) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping hp_qla2x00src-8.01.07.25-1

Installing fibreutils...

Preparing... ########################################### [100%]
1:fibreutils ########################################### [100%]

I already have kernel-devel installed:
[root@pss1db3a hp_qla2x00-2007-10-05a]# rpm -qa |grep kernel-devel
kernel-devel-2.6.9-78.0.8.EL


Can someone please advice me on how to resolve this error? thanks
3 REPLIES 3
Jimmy Vance
HPE Pro

Re: error encountered when installing Qlogic driver

Is the kernel-devel package you have installed for the running kernel version?
No support by private messages. Please ask the forum! 
philipho827
Occasional Advisor

Re: error encountered when installing Qlogic driver

Hi Jimmy,

i solved the problem already. need to update my kernel version to the latest.
I was using version 2.6.9-67.
Jimmy Vance
HPE Pro

Re: error encountered when installing Qlogic driver

Jimmy Vance
Is the kernel-devel package you have installed for the running kernel version?
-------------------------------------------
philipho827
Hi Jimmy,

i solved the problem already. need to update my kernel version to the latest.
I was using version 2.6.9-67.

---------------

That's basically what my answer was, you didn't mention what kernel was running, but generally if you have the devel package installed and get an error like what you have the running kernel and the devel utils don't match.

Don't forget to assign points


No support by private messages. Please ask the forum!