HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

how do I do a blade 460 upgarde firmware

 
osuxcios
Occasional Visitor

how do I do a blade 460 upgarde firmware

I have a hp blade 460 enclosure. What I've read so far is dump the iso onto a dvd. Then HP says deploy, what the heck is deploy mean? I tried resetting all blades and a one time reboot to a cd with an attached dvd and the iso burned to the dvd. I also powereed down the enclosure by pulling all the power cables. How can I get the enclosure to update the firmware please?
2 REPLIES
P Arumugavel
Respected Contributor

Re: how do I do a blade 460 upgarde firmware

hi,

Go through below HP support documents.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02610861〈=en&cc=us&taskId=101&prodSeriesId=4194735&prodTypeId=3709945

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00775106〈=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351

Rgds...
David Claypool
Honored Contributor

Re: how do I do a blade 460 upgarde firmware

Those docs are nice but aren't comprehensive enough. HP has defined a process to make it easier to obtain and deploy updates and have documented best practices:

http://www.hp.com/go/bladesystem --> "HP BladeSystem Release Sets for ProLiant"