BladeSystem - General
1748140 Members
3667 Online
108758 Solutions
New Discussion юеВ

Re: hp c7000 and vc-fc module uplink

 
SOLVED
Go to solution
UK-Blr
Frequent Advisor

hp c7000 and vc-fc module uplink

when the c7000 enclosure is in production and if we add few more physcial uplinks (FC cables) to the currently running/configured VC FC modules, what will happen to the currently running servers, which are connected to SAN.

Does the HBA learn the new path automatically or does it requires a reboot to learn and login to the FC switch.

Note. Login distribution is dynamic and vc-fc modules are 4gbps with VC firmware ver. 2.01.

Environment includes both windows, linux and vmware esx.
5 REPLIES 5
JKytsi
Honored Contributor

Re: hp c7000 and vc-fc module uplink

It will distribute the logins to uplinks when a blade does a fabric login. You can also manually force distribution evenly to all uplinks from VC GUI. Or later VC firmwares it works =)

But HBA has nothing to do with it. VC decides the balancing.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
UK-Blr
Frequent Advisor

Re: hp c7000 and vc-fc module uplink

my mistake. I missed it earlier . The servers are running currently and i would like to achieve this addition of fc uplinks without rebooting any server.
JKytsi
Honored Contributor

Re: hp c7000 and vc-fc module uplink

You can add uplinks without rebooting the servers.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
UK-Blr
Frequent Advisor

Re: hp c7000 and vc-fc module uplink

thanks .. verified it.

Even if we add additional uplinks, the server will not automatically login to the new switch port.

Server will login to the new switch port, only after a reboot.

However, if we add the uplinks when the servers are ON, this will not create any issue, nor data loss.


Thx
Uday
JKytsi
Honored Contributor
Solution

Re: hp c7000 and vc-fc module uplink

Like I said
"It will distribute the logins to uplinks when a blade does a fabric login."

and blade does a fabric login when it boots. Or when FC driver is reloaded.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi