HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

iLO Drops and then Reconnects

Andrew Schlafmann
Frequent Advisor

iLO Drops and then Reconnects

I have a problem with the blades in one of my c7000 v2.25 enclosures. The iLO will disconnect and then reconnect some time later (I am monitoring it in HPSIM 5.2SP2). The blades have iLO 1.70 on them they are bl465c servers. The firmwares on the servers range from 2007.04.05 to 2008.11.06.
Steven Clementi
Honored Contributor

Re: iLO Drops and then Reconnects


Not exactly sure what the new OA firmware fixes, but you might want to look there first since all iLo traffic passes through the OA network interface.

Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
NPP3 (Nutanix Platform Professional)