HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO access with OA

 
SOLVED
Go to solution
Jeff Hui
Occasional Contributor

iLO access with OA

For C3000, can I access Server Blade iLO if OA is break down?
6 REPLIES
Walid Halabi
Advisor
Solution

Re: iLO access with OA

Hi Jeff,

yes, you can,t access the server iLO because the OA is the bridge between the servers and outside management.

Regards,
Jeff Hui
Occasional Contributor

Re: iLO access with OA

Thanks.
Raghuarch
Honored Contributor

Re: iLO access with OA

Hi Jeff,

If you know the IP address of the ILO's you can access the them even if the OA is down.

For that you should know the IP address of iLO.

If you don't know the IP address of the ILO's you can find it in the RBSU or HPSIM if you have in your network and discovered the OA.

Regards,
Raghuarch


Raghuarch
Honored Contributor

Re: iLO access with OA

Hi Jeff,

The best practices and Tips refer:
http://h18013.www1.hp.com/products/servers/management/ilobest-practice.html

Regards,
Raghuarch
Adrian Clint
Honored Contributor

Re: iLO access with OA

Raghuarch

A thought.....what happens when EBIPA is used for the iLO addreses when the OA is down?
Raghuarch
Honored Contributor

Re: iLO access with OA

iLO's will be up and running with EBIPA.
Its a 2 a steps communication.
1. Assign IP, It will be over.
2. Communicate with the IP, this will fail .. but the IP will remain unchanged.

Regards,
Raghuarch