BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

in blade when we are connecting Local I/O cable c

Seby Thomas
Occasional Visitor

in blade when we are connecting Local I/O cable c

in blade when we are connecting Local I/O cable to monitor,the monitor display is not showing anything .but i can RDP into same server.can u please confirm how can i resolve this problem and i can use same I/O cable to connect to other blade server
3 REPLIES
Cederberg
Honored Contributor

Re: in blade when we are connecting Local I/O cable c

Hey.

Does the ILO console work?

Is there any other problem with the server.

If the Ilo console doesn't work it sounds like a busted Graphic card. The Windows RDP uses the clients Graphic card. the Local I/0 Cable and ILO console uses the servers graphic card.
Seby Thomas
Occasional Visitor

Re: in blade when we are connecting Local I/O cable c

ILO is working fine,the only problem is when Local I/o cable is connected in the monitor it will not display anthing
WFHC-WI
Honored Contributor

Re: in blade when we are connecting Local I/O cable c

Are you sure this is a working monitor? :)

I assume you are also connecting a keyboard to the SUV cable. Do you get any activity after pressing a key? Changing NUM LOCK on/off or anything? If not, you may have a failed cable or bad SUV port on the blade.

good luck