BladeSystem - General
1748028 Members
5296 Online
108757 Solutions
New Discussion

nc373i Boot code: v1.9.6 or v4.4.1?

 
HubertG
Occasional Contributor

nc373i Boot code: v1.9.6 or v4.4.1?

Planning to update several DL380-G5 and DL580-G5 servers, including the nc373i network adapters. Looking at the Release Notes: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=3660135&swItem=MTX-8eddcfd746204c07a686d3e25f&prodNameId=3660137&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=1
it appears there are two versions of boot code. Which version will be installed? Is there a preference to select one version over the other?
1 REPLY 1
HubertG
Occasional Contributor

Re: nc373i Boot code: v1.9.6 or v4.4.1?

Posted to wrong category. Will re-post