BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

on board administrator module replacement

joseph pareti
Frequent Advisor

on board administrator module replacement

A customer has purchased new c7000 DDR2 KVM OA and needs to swap them  online removing the old C7000 OA

 

 

Is the following process supported (mixed with old OA module)?  is there a manual or whitepaper on the topic?

 

 

Onboard Administrator module replacement to DDR2 KVM OA

 

1. Logon in  the OA  check which OA  is the Standby   OA

2. remove the  Standby OA Module

3. Insert  the new DDR2 KVM OA     ( now mixed with old OA module)

4. Logon in  the OA go to  "Active to Standby"   Onboard Administrator click on " Transition Active to Standby" to make the new DDR2 KVM OA to active

5. Remove now the Standby OA Module (must be the old C7000 OA )

6. Insert  the second new DDR2 KVM OA  

7. Logon in  the OA go to  "Active to Standby"   Onboard Administrator click on " Transition Active to Standby" to make the second new DDR2 KVM OA to active

8. Logon in  the OA check both OA are available and Status is OK