BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

p-class Sever enclosure no serial number !!!

 
SOLVED
Go to solution
Thomas Loicht
Occasional Visitor

p-class Sever enclosure no serial number !!!

Hi,
one of my p-class Server Enclosure has no Serial Number. Is there a way do get the serial number back into the enclosure.

Enclosure Firmware 2.32

Thanks
4 REPLIES
Aks2
Valued Contributor
Solution

Re: p-class Sever enclosure no serial number !!!

Access the server blade management module through the serial port.. you will have an option to enter the serial number manually:


Server Blade Management Module Page Navigation

The blade management module has six pages. These are:

Startup
Server Blade Status (or Main page)
Access the main page by pressing the M key when on another page.

Enclosure Serial Number
Access the Serial Number page by pressing the E key when on another page.
Help Status
Access the Help page by pressing the H key when on another page.
You can always Redraw the screen by pressing the Space Bar.

Press the E key.
Type in the new serial number.
Press the Enter key to accept or press the Esc key to cancel.
Retype the new serial number.
Press the Enter key to accept or press the Esc key to cancel.
Note: To exit without making any changes, press the Esc key. If the Esc key does not function, try pressing an arrow key, or type ESC in the Serial Number field and press Enter.

Important! Reset all Server Blade Management Modules for the change to take effect.

cheers
Akarsh

Thomas Loicht
Occasional Visitor

Re: p-class Sever enclosure no serial number !!!

Hi,

thanks for your answer. That solved my problem.

thank you
Thoams
Thomas Loicht
Occasional Visitor

Re: p-class Sever enclosure no serial number !!!

Thread Closed
Aks2
Valued Contributor

Re: p-class Sever enclosure no serial number !!!

welcome Thomas,
dont forget to assisgn some pts :)

Cheers
Akarsh