BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

p-class signal connector - Please help!!!

Jonathan_f
Occasional Visitor

p-class signal connector - Please help!!!

I have a single bl25p (no enclosure).
Bought an ILO cable and telecoms PSU and the blade runs sweet.

What i really need is a network connection, so;

1) is there a SIGNAL CONNECTOR - RJ45 adapter

2)Does any one have or know where i can get the SIGNAL CONNECTOR PINOUT for the p-class

3) is someone willing to use a meter and buzz out the 16pins needed for NIC1 & NIC2?

ps. please don't suggest a blade enclosure or a diagnostic station (i don't have the money)

thankyou for reading :-)
Jonathan
2 REPLIES
Oleg Koroz
Honored Contributor

Re: p-class signal connector - Please help!!!

not to be known
but if you get something, please update thread



Oleg Koroz
Honored Contributor

Re: p-class signal connector - Please help!!!

Jonathan you might end up to purchase few parts, which is originally part of diag box.
Less than diag box, but not guaranteed (does board requires power feed or not for signal pass through? I don't know)
VHDM converter 257875-001
Board 257874-001
Diagnostic Cable 257873-001