HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
Showing results for 
Search instead for 
Did you mean: 

port X0 stacking link absent

Go to solution
Occasional Contributor

port X0 stacking link absent

hello all,
i have a BladeSystem c7000 Enclosure G2 with:
12) ProLiant BL460c G6
2) HP VC Flex-10 Enet Module (Firmware Version 3.15)
2) HP VC 8Gb 20-Port FC Module (Firmware Version 1.41).

With Virtual Connetc Manager i have imported the OA Enclosure and configured Domain, Network ad Fibre Channel.

But from Virtual Connect Manager under stacking link i not see the port X0 stacking but only the :Bay1:PortX7 to Bay2:PortX7.

There is something wrong or is this normal?

sorry for my English, but I'm Italian :-)

thanks in advance to all

Re: port X0 stacking link absent


stacking for FC Flex-10 is on port X7 and X8. If you configure X7 and X8 as uplinks or insert SFP in them, then they do not stack. This is different from VC 1/10 module.

So this is normal.
Occasional Contributor

Re: port X0 stacking link absent

Hi Chris,
thanks for your answer!