BladeSystem - General
1748232 Members
3865 Online
108759 Solutions
New Discussion юеВ

Re: power down procedure for C7000

 
SOLVED
Go to solution
Anna Cheng
Advisor

power down procedure for C7000

I checked into the C7000. I don't see any power switches, therefore if I do need to power down the C7000, should I just unplug the power cords?

In addition, the "device power sequence" shown on the OA, is it ONLY used for determining the powerup sequence, and my blades do not have any dependency, I can just leave them disabled and will the blades be automatically come up after the C7000 has been up?

thanks
3 REPLIES 3
JKytsi
Honored Contributor
Solution

Re: power down procedure for C7000

No other way than pulling the plug =)
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Anna Cheng
Advisor

Re: power down procedure for C7000

thanks.
Easy answer :-).

But does any know whether I need to "enable" the device power sequence? I know I can use that to order to power up sequence, but if I just want everything to come up, do I need to do anything?

JKytsi
Honored Contributor

Re: power down procedure for C7000

nope =)
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi