BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

"Corrected threshold exceeded" Memory Error on BL460c

Fabietto
Occasional Visitor

"Corrected threshold exceeded" Memory Error on BL460c

Why the following error: Corrected Memory Error threshold exceeded (System Memory, Memory Module 5) countinuously appears even if all memory DIMMS have been replaced??

Thanks a lot,
Fabio
6 REPLIES
JKytsi
Honored Contributor

Re: "Corrected threshold exceeded" Memory Error on BL460c

could be a faulty mainboard or a BIOS update needed.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
JKytsi
Honored Contributor

Re: "Corrected threshold exceeded" Memory Error on BL460c

And what is your Proliant support pack version ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Fabietto
Occasional Visitor

Re: "Corrected threshold exceeded" Memory Error on BL460c

ProLiant support Pack version 8
JKytsi
Honored Contributor

Re: "Corrected threshold exceeded" Memory Error on BL460c

hmm ... and you have Advanced ECC enabled in BIOS (default setting)
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Quality Center: Connect
Occasional Visitor

Re: "Corrected threshold exceeded" Memory Error on BL460c

Are there any updates to this thread?

We are experiencing the same issue on multiple BL460c servers (10% of the blades). We have switched out the DIMMs but with the same "Corrected Memory Error threshold exceeded (System Memory, Memory Module x)".

We have performed blade firmware updates (L15 11/02/2008) which has alleviated our reboot issues but not the RAM error.

Thank you for any help.
Timur S Lukovkin
Regular Advisor

Re: "Corrected threshold exceeded" Memory Error on BL460c