BladeSystem - General
1748202 Members
2959 Online
108759 Solutions
New Discussion юеВ

re : Bladesystem C7000 enclosure

 
Vincent_5
Super Advisor

re : Bladesystem C7000 enclosure

Hi Guys,
Can anyone help with the steps how can I update the IOS for the cisco 3020 switch on the C7000 blade enclosure. The operating on the bl460 blade is intel sun solaris. Kindly help

Regards
Vincent
nothing is better than to know more
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: re : Bladesystem C7000 enclosure

Locate the firmware on hp.com/go/bcs and follow the instruction.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: re : Bladesystem C7000 enclosure

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=2510335тМй=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=3709945&prodSeriesId=2510334

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Vincent_5
Super Advisor

Re: re : Bladesystem C7000 enclosure

Hi Torsen,
Thanks for sending the info, sorry I don't know much about cisco switches or even the command to execute the file. Can you send me the steps?? Appreicate. By the way, can I used a laptop with networking cable to link up to the switch to upgrade the firmware and how can I backup the existing configure and restore back in case it does not work??

Regards
Vincent
nothing is better than to know more