BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

(retriving logs) BL45p with fibre link issue to MDS switch

Koopa
Frequent Advisor

(retriving logs) BL45p with fibre link issue to MDS switch

I have been getting reports from the "showtech command" on the MDS switch for 1 connection that keeps dropping off, I can see that the connection in question keeps hitting a threshold then it diables the port. Does anyone know if there are logs i can check on the Blade to see if i can pin point where the fault is?

Any help/suggestions would be apreciated!