BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

sb40 blade not detecting

Shrinivas C. Kulkarni
Occasional Contributor

sb40 blade not detecting

I have sb40 blade server after rebooting
atta..server(460c) it not getting detected
if i reboot it twice(only server) it get detected

is there need to down sb40 also ?
i tried rescan option in array config. utility

pls help
1 REPLY
Phil uk
Honored Contributor

Re: sb40 blade not detecting

Hi,

Your symptoms may be due to the following advisory:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01458856&prodTypeId=329290&prodSeriesId=1844065


**Note: If this is your problem then upgrade to the latest firmware, but NOT to 2.20 as in the Advisory as this release has been withdrawn.

You may need to update your iLO F/W before doing the OA F/W.

Regards,
Phil