HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

simple question about HP 10Gb Ethernet BL-c Switch

 
SOLVED
Go to solution
mujzeptu
Super Advisor

simple question about HP 10Gb Ethernet BL-c Switch

Simple question about HP 10Gb Ethernet BL-c Switch.

Do I have to have two per enclosure or not?
2 REPLIES
Adrian Clint
Honored Contributor
Solution

Re: simple question about HP 10Gb Ethernet BL-c Switch

Such a simple question and such a simple answer. But lots of questions from this.
Simple answer = No

But.
Are you wanting redundant 10Gb Connections?
This is only supported with the NC512m 10Gb NIC.
Not supported on all blades (BL49x no support)
Only supported in some interconnect slots. 5/6 and 7/8 on a c7000
mujzeptu
Super Advisor

Re: simple question about HP 10Gb Ethernet BL-c Switch

Do they not work with the 490c g6s?

I do not need redundancy just wanting to have it for internal communication between 5 enclosures.