HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

status

 
Mike Tupker
Advisor

status

The only indication that I can see is that the System Health status has a yellow warning sign next to it and it says the status is degraded.

I just reset the iLO controller for the bl460 and the status got changed back to ok. Is it common for iLO to get confused like that?
6 REPLIES
Torsten.
Acclaimed Contributor

Re: status

Not enough information I'm afraid.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mike Tupker
Advisor

Re: status

Yep thats the problem. The iLO logs don't show anything to indicate that there was a change in the status of the server, nor do any of the diagnostic messages.
Torsten.
Acclaimed Contributor

Re: status

**Where** do you see the yellow warning sign?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mike Tupker
Advisor

Re: status

Looks like I accidentally created a new thread in one of my responces to a previous posting.

Original post at:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1339064

I just started getting a degraded status from one of our blade servers from the OA on the c3000 chassis. However I can't find anything that will tell me what is "degraded". Is there a way to find out or do I need to take the server offline and use the diagnostic CD. I would rather not have to take it offline since this is a VMware host running about 15 VMs.
Mike Tupker
Advisor

Re: status

The actual location of the degraded message is on the Summary page of the System Status tab next to the System Health check.
Torsten.
Acclaimed Contributor

Re: status

On the system management homepage of the blade? Normally you should click on "System" and you will see more details (CPU, memory, etc), click on the next sub-item ...

But you can also have a look into the IM log of the enclosure.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!