tagged vlans and VC ethernet modules

[Alex Samad]

Hi

I am trying to setup a trunk port to a blade in a c7000 enclosure.

I have vlan 1, 100 and 101 that I need to get to the blade that is on the core network. 1 is untagged and 100 & 101 will need to be tagged.

I have 3 ethernet networks defined (using a shared uplink), but I can only apply 1 network in the server profile for nic port 2

how can I assign tagged vlans to network ports on blades

Thanks

[Julian Stenning]

Hi -

I don't tihnk you can do what you want with using a shared uplink port, as you can only present one ethernet network (vlan) per nic.

Delete the shared uplink and create an ethernet network only, present that to the blade NIC and configure your VLANs within the OS used on the blade.

J

[Ole Thomsen_1]

I heard that was solved with Virtual Connect firmware 1.31 - haven't upgraded myself yet and cannot confirm.

Ole Thomsen

[Alex Samad]

I currently have 1.31, and I don;t seems to be able to do it

[david_pol]

Hi, Did you ever figure out ho wto do this? Thanks

[Server-Support]

Does it requires any outage to the server Operating system to do that ?