BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to assign 10 G switch ports

 
Erik Hochweller
Occasional Advisor

unable to assign 10 G switch ports

Hi,

So i have multiple blades in my C7000 chassis. 2 of them are with graphics extension and they work fine.
I have created a network and assigned a profile to it for the above blades. all works fine.
Now i have a serverblade which i connect in this chassis, and when i try to create a server profile for it i can assign the port and everything, then say apply and i get FAILED. It doesnt assign the port to it and i actually cannot even start the blade now. No power options work.

Any ideas?

Thanks,

Erik Hochweller
2 REPLIES
Erik Hochweller
Occasional Advisor

Re: unable to assign 10 G switch ports

If it helps, i had to reset these blades with a hardware reset as it for odd reason didnt detect a keyboard and mouse...

when i try to assign a blade slot to the server profile i get a error in the SN field saying INVALIDATA00...

Erik
Erik Hochweller
Occasional Advisor

Re: unable to assign 10 G switch ports

well now i found the answer to the INVALIDATA00 part... just need to restart the VC...