HPE Community
BladeSystem - General
1753716 Members
4779 Online
108799 Solutions
New Discussion юеВ

unassign the HA Alternate bootpath.

 
LuisGResendiz
Visitor

тАО06-22-2018 07:43 AM

тАО06-22-2018 07:43 AM

unassign the HA Alternate bootpath.

Good morning everyone, I need to unassign the HA Alternate bootpath, it's assigned to the mirror disk and there is no need to have it, is there any way to remove it?

# setboot
Primary bootpath : 0/0/0/2/0/0/0.0x0.0x1000000c0000000 (/dev/rdisk/disk17)
HA Alternate bootpath : 0/0/0/2/0/0/0.0x0.0x1010000c0000000 (/dev/rdisk/disk18)
Alternate bootpath : 0/0/0/2/0/0/0.0x0.0x1010000c0000000 (/dev/rdisk/disk18)

Autoboot is ON (enabled)
Hyperthreading : ON
: ON (next boot)


Thanks in advance.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО06-22-2018 01:44 PM

тАО06-22-2018 01:44 PM

Re: unassign the HA Alternate bootpath.

why remove it? it is the next try if the primary fails.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
LuisGResendiz
Visitor

тАО06-25-2018 07:59 AM

тАО06-25-2018 07:59 AM

Re: unassign the HA Alternate bootpath.

Hi Torsten:

I was just trying to see if that is possible, I know that the other disc is the next try, in fact it is the same as the secondary, but my boss wanted to know if it was possible, so I asked, thanks.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.