BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

adhitya_akbar
Occasional Collector

unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

Hi, 

 

I like the interface and how fast it's  when I install the RHEL server on it. :)

 

but unfortunately I got some unknown status of SAN Switch HP B-Series after accessing HP Virtual Manager. 

 

I'm new for HP System.. I've already google it and read manual book but still can't wondering why it's still unknown. Is this a normal symptomes? Or do we have to configure something?

 

thank you.

BR/Adhitya

 

 

 

 

 

5 REPLIES
Robert_Jewell
Honored Contributor

Re: unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

You are viewing this through the Virtual Connect Manager interface, but this switch is not a Virtual Connect module.

 

Login to the BladeSystem OA and see what you see for these interconnect module switches.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
adhitya_akbar
Occasional Collector

Re: unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

Hi Robert,

 

Did you means it's normal?

 

SAN Switch firmware : 7.0c

 

I can see that SAN Switch already on from OA Administrator, I attached the screenshot.

Robert_Jewell
Honored Contributor

Re: unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

Thats what I am thinking.  VCM wouldnt manage these switches so it make sense for them to be reported as "unmanaged" from that point of view.

----------------
Was this helpful? Like this post by giving me a thumbs up below!
wisdomadjah
Occasional Visitor

Re: unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

So how can the switch be managed
Robert_Jewell
Honored Contributor

Re: unknownBay problem on HP B-Series 8/12c SAN Switch BladeSystem c-Class

These are Brocade switches.   They are managed using FabricOS.  Connect to it using the management IP address that is assigned to it by the OA.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!