cancel
Showing results for 
Search instead for 
Did you mean: 

uplink C7000

SOLVED
Go to solution
Broitmann
Occasional Visitor

uplink C7000

Hi all
We have bought a second C7000 enclosure and I'd like to link it to the first one so we can manage both in one go.
I've propely cabled it, but I think there is a configuration to do somewhere.
Can anyone help?

Thanks
5 REPLIES
JKytsi
Honored Contributor

Re: uplink C7000

Hi,

Check OA firmware levels (should match) and check also the interlink cable (bottom enclosure to link up and top enclosure link down connectors)

No configuration needed.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Raghuarch
Honored Contributor

Re: uplink C7000

refer to page 7 it shows the rear Down link and up link locations.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00698534/c00698534.p
df?jumpid=reg_R1002_USEN
Page 52 in the below Doc.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00698286/c00698286.p
df?jumpid=reg_R1002_USEN
Broitmann
Occasional Visitor

Re: uplink C7000

These are the docs I've used to cable it. I've checked and updated the firmwares so they are all to the same level.
Should I use a cross cable?
Currently there's no light on on the OA. Is it normal? will there be any when it's properly cabled?

thanks
JKytsi
Honored Contributor
Solution

Re: uplink C7000

The interlink cable sockects will have light if everything is ok.

normal cable is used.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Broitmann
Occasional Visitor

Re: uplink C7000

Well, finally it was simply the network cable which was out of order.

Thanks all!