BladeSystem Management Software

Accessing OA from Cisco port 21

 
BPietro
Occasional Advisor

Accessing OA from Cisco port 21

Hello, Recently I installed two C7000 enclosures that were typical until the customer tossed this my way. He did not want the OA's connected to their network via the OA/ILO network port, but instead wanted to access the OA's internally via port 21 on two CIsco 3020 switches. Can this be done? The enclosure has the following: (4) Cisco 3020 (2) Cisco 9124e (2) OA Thanks Peter Barone GDS Engineer
3 REPLIES 3
BPietro
Occasional Advisor

Accessing OA from Cisco port 21

This was caused by a mis-understanding and has been resolved. Regards
BPietro
Occasional Advisor

Accessing OA from Cisco port 21

This was caused by a mis-understanding and has been resolved. Regards
konakcc
Advisor

Accessing OA from Cisco port 21

For everyone else reading this, the CBS3020 and CBS3120 are connected to OA via interface fastethernet0 not port 21.