BladeSystem Management Software

Automatisation of ICE key deployment

 
nowakowski
New Member

Automatisation of ICE key deployment

I'm sorry if it's a newbee question, but... I don't find a simple way to but my ICE licence key on my ILO. I can easily connect via HTTPS to my differents ILO using OA's SSO. But I don't know how to do that with a command line connection. And if I use a command line to connect to my ILO, I must have the factory password of each ILO. My plan is to configure ILO through my OS - Windows 2003, in connected mode (I'm logged on my w2003, so I have the permission to read / write ILO - if driver is installed, of course). Anyone got a better and simplier idea ?
1 REPLY 1
dclaypool
Occasional Advisor

Automatisation of ICE key deployment

Questions like this are probably better posted in either the HP SIM technical forum in the IT Resource Center (http://forums11.itrc.hp.com/service/forums/categoryhome.do?categoryId=455) or the Lights-Out technical forum (http://forums11.itrc.hp.com/service/forums/categoryhome.do?categoryId=298). There you'll be able to read other posts on technical issues such as this, and probably find a solution already offered. You can utilize HP SIM (5.3 or later) license manager to apply licenses to your iLO2 automatically. If you don't have HP SIM operational, best practice would be to use the HPONCFG utility run from the operating system to apply the license. It will directly configure the iLO without needing login credentials. See http://www.hp.com/go/ilo --> Documentation --> "HP Integrated Lights-Out Management Processor Scripting and Command Line Resource Guide for HP Integrated Lights-Out versions 1.82 and 1.91 and HP Integrated Lights-Out 2 versions 1.1x, 1.2x, 1.3x, and 1.70" for more information.