BladeSystem Management Software

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

 
Torsten.
Acclaimed Contributor

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Exactly. ;-)

Get the SPP 2014.02 (B) from here:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=spp_2014.02.0B

extract the ISO and you will find the USB create utility. Use this utility to create an USB thumb drive from ISO and boot from it. Select interactive update, agree EULA, select firmware update, review the components and deploy.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Mike Texter
Valued Contributor

Re: Error 404 after the installation of SPP for Proliant MicroServer Gen8

Will give it a try and report back, i believe a co-worker of mine was having the same issue with the USB version on the same system model, a separate DL380G5, but for the sake of science, it's my turn to give it a go.  Thanks!

Hardware Specialist