HPE Community
BladeSystem - General
1753311 Members
6339 Online
108792 Solutions
New Discussion

Re: HP SPP does not detect correct Windows drivers

 
whopie2002
New Member

‎12-11-2013 06:44 AM

‎12-11-2013 06:44 AM

HP SPP does not detect correct Windows drivers

I am booting from the SPP 2013.09.0(B) ISO to update firmware on a BL460c G7 running Windows Server 2008 R2. When I run through the wizard, it detects the server 'type' as Linux and not Windows. When it continues, it lists the Linux drivers to install, rather than the ones required for this Windows server. Is this a known issue, or am I missing something ?
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-11-2013 06:48 AM

‎12-11-2013 06:48 AM

Re: HP SPP does not detect correct Windows drivers

If you boot the SPP, it runs linux from the CD.

The screen will list FIRMWARE to update, if you see linux DRIVERS, ignore them.

To update drivers, start HPSUM from running windows!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.