BladeSystem - General
1748185 Members
4261 Online
108759 Solutions
New Discussion

Re: HPQLOCFG v1.5: Unable to read data on the SSL stream

 
SeanOBanion-G1
Occasional Advisor

HPQLOCFG v1.5: Unable to read data on the SSL stream

I'm testing being able to configure LDAP via hpqlocfg (version 1.5) from a Win7 VM Workstation against an Integrity iLO3 (version 1.56). The test is to read the LDAP settings.

I think I'm getting to the iLO but is seems to not be able to get backup me (see below).

The Workstation is on a different subnet than the iLO, and our network team has allowed all TCPIP traifc in both dircetions. I recently upgraded the C7000 via HP SUM from this same Workstation, so I suspect I have a working network.

What should I check for?

 

Sean

hpqlocfg -s x.x.x.231 -F Get_Directory.xml -L Get_Directory.log -V -U <user> -P <pass>
Lights-Out Configuration Utility - HPQLOCFG v1.5.0.0 dated 28/9/2015

(c) Hewlett-Packard Company, 2015


Detecting iLO....
Negotiated cipher:256-bit Aes256 with 160-bit Sha1 and 1024-bit RsaKeyX


Reconnecting to iLO. Please wait...
Negotiated cipher:256-bit Aes256 with 160-bit Sha1 and 1024-bit RsaKeyX

Negotiated cipher:256-bit Aes256 with 160-bit Sha1 and 1024-bit RsaKeyX

.
.
.

ERROR: Unable to read data on the SSL stream from server :x.x.x.231

1 REPLY 1
SeanOBanion-G1
Occasional Advisor

Re: HPQLOCFG v1.5: Unable to read data on the SSL stream

I opened a support ticket and was told the HPQLOCFG does not support Integrity iLO3, although it the documentation says that by omission.  I suggested that somewhere the documentation should list that lack of support explicitly.