BladeSystem Management Software

Windows PXE boot for HP Proliant 2012xx fails to mount filesystem.

 
dennyaaa
Frequent Visitor

Windows PXE boot for HP Proliant 2012xx fails to mount filesystem.

Hello everyone. I am having a seriouse problem with the HP proliant 201208.iso and our windows PXE enviroment. Ever since I upgraded from  the 201202 pack I get a "failed to mount filesystem" after the HP picture hangs on screen for half a minute. We are running a simple PXE boot enviroment and this is the pxelinux.cfg default file out put:

 

 

label f9
menu label ^9) HP Firmware Update
kernel HPFWU201208/vmlinuz

append initrd=/HPFWU201208/initrd.img media=cdrom rw root=/dev/ram0 ramdisk_size=900000 init=/bin/init loglevel=3 ide=nodma ide=noraid nopat pnpbios=off vga=791 splash=silent hp_fibre showopts noexec32=off numa=off nox2apic TYPE=MANUAL AUTOPOWEROFFONSUCCESS=no iso1mnt=/mnt/bootdevice iso1=nfs://[path to server holding the iso file]/preload2/hppxe/HP_Service_Pack_for_Proliant_2012.08.0-0_703859-001_SPP_2012.08.0-SPP2012080.2012_0730.60.iso

 

I have tried almost everything which is very fustrating since it just worked up untill 201202. Anyone having the same issue? Or even a solution?