Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

6125 blade switches and console

SOLVED
Go to solution
Highlighted
Aboven
Regular Visitor

6125 blade switches and console

Hi! 

Currently on the back of the C7000 I have two 6125  blade switches in the enclosure (attach OA scr.jpg).

When you try to connect to one of them in the console, I see the characters (attach Scr console.jpg).

To connect using cabel RJ45-DB9 and programm PuTTY (attach Scr conf Putty.jpg).

I tried to change the "Remot character set" in PuTTY, but to no avail.

Need some help.

P.S.: Sorry for my English skills. I used an online translator (

2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: 6125 blade switches and console

I did this some time ago with default putty settings, but from the OA.

ssh to the OA, then "connect inerconnect ..." to the switch.
Better results?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aboven
Regular Visitor

Re: 6125 blade switches and console

Torsten thanks, it works!

I asked ip adress for both switches.  But they unknown by the console (attach Scr1.jpg).

Directly on the Web interface are available.

How to manually specify "Managment IP address" and Managment URL ?