HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Network Blades
Showing results for 
Search instead for 
Did you mean: 

6125 blade switches and console

Go to solution
Regular Visitor

6125 blade switches and console


Currently on the back of the C7000 I have two 6125  blade switches in the enclosure (attach OA scr.jpg).

When you try to connect to one of them in the console, I see the characters (attach Scr console.jpg).

To connect using cabel RJ45-DB9 and programm PuTTY (attach Scr conf Putty.jpg).

I tried to change the "Remot character set" in PuTTY, but to no avail.

Need some help.

P.S.: Sorry for my English skills. I used an online translator (

Acclaimed Contributor

Re: 6125 blade switches and console

I did this some time ago with default putty settings, but from the OA.

ssh to the OA, then "connect inerconnect ..." to the switch.
Better results?

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Regular Visitor

Re: 6125 blade switches and console

Torsten thanks, it works!

I asked ip adress for both switches.  But they unknown by the console (attach Scr1.jpg).

Directly on the Web interface are available.

How to manually specify "Managment IP address" and Managment URL ?