HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

6125XLG and C3000 compatibility question

 
chuckk281
Trusted Contributor

6125XLG and C3000 compatibility question

Don had a interconnect question:

 

**********

 

One of my partners is asking if the HP 6125XLG is supported in the C3000.  I checked SAWs and the quickspecs and it only mentioned the C7000.  I just want to check to see if this might be an oversight or if there is a technical reason why it wouldn’t be supported in the C3000.

 

Thank you in advance,

 

**********

 

Info from Hiro:

 

***********

 

The c3000 midplane, like the Gen1 c7000 midplane, has signal integrity issues with 6125XLG with certain NICs at 10G. Due to these issues the 6125XLG supports only the higher quality Gen2 and Gen3 midplanes of the c7000 for error-free operation in all conditions.

 

**********

 

Comments?