BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

An Issue with HP B-series 8/12c SAN Switch BladeSystem c-Class and ProLiant BL460c G1

SOLVED
Go to solution
Nedal_Abdouni
Occasional Advisor

An Issue with HP B-series 8/12c SAN Switch BladeSystem c-Class and ProLiant BL460c G1

Hi Guys

 

I'm really sorry if I'm posting in the wrong forum, and sorry again for my English

 

My problem is that I have an HP BladeSystem Closure C3000 and inserted to ProLiant BL460c servers, and inserted also a SAN Switch, the blade sees all of them but the problem is that there's no connection in the port mapping information as attached.

 

Can anyone help?


Many thanks in advanced

2 REPLIES
Nedal_Abdouni
Occasional Advisor
Solution

Re: An Issue with HP B-series 8/12c SAN Switch BladeSystem c-Class and ProLiant BL460c G1

Thanks guys for your help. it worked fine.

 

The thing is that the Qlogic card was inserted in the wrong slot.

 

Thanks again

sjaloma
Occasional Visitor

Re: An Issue with HP B-series 8/12c SAN Switch BladeSystem c-Class and ProLiant BL460c G1

i have an issue with Cisco MDS9124e Fibre switches I have placed these into NPV mode so that I can see them in a external Brocade SAN, and that works however i cannot see the WWN for the Blades behind the MDS switches now I have plugged in port EXT4 to the brocade switches and My thinking is the interconnect mapping is to port 1 & 2 on the MEZ to MDS switches...?

 

thoughts  thank you