HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Cabling from HP10Gb Pass-thru module to Cisco 2232

 
chuckk281
Trusted Contributor

Cabling from HP10Gb Pass-thru module to Cisco 2232

John had a cabling issue:

 

********************

 

Hi Folks:

 

I am planning on using 3m 487655-B21 DAC cables to connect 10Gb Pass-Thru modules to Cisco Nexus 2000's (2232's).   Can anyone comment as to whether or not these cables will work.  I noticed in the FlexFabric QuickSpec there are other 3m DAC cables, particularly the AP819A.

 

*********************

 

Steve replied:

 

***********************

 

The 10Gb Pass Thru will accept any DACs from any manufacturer. Tested cables are HP/ProCurve, BNT, Cisco.  Others will work but we do not offer any guarantee and customers must evaluate the risk.

The Cisco switch should allow the B-21 cables but the Cisco switch needs to be configured to accept non Cisco cables and will complain about it in the CLI.

 

*********************

 

Other comments or questions?