HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco Fabric Extender with HP Blade Integrity ?

 
chuckk281
Trusted Contributor

Cisco Fabric Extender with HP Blade Integrity ?

Jean-yvers had a question regarding the Cisco FEX module:

 

****************

 

No really clear if the Cisco FEX is fully supported and functionnal with Integrity blades.

Customer is trying to configure BL860ci2 with NC553m with HP B22 Cisco Fabric extender connected to a Nexus5000

I didn’t find if this configuration is fully supported under HPUX/VMWARE/RedHAT

Any advice Welcomed

 

***************

 

Reply from Steve:

 

***************

 

From the FEX QuickSpecs

HP Integrity Servers

HP Integrity BL860c Server Blade
HP Integrity BL860c i2 Server Blade
HP Integrity BL870c Server Blade
HP Integrity BL870c i2 Server Blade
HP Integrity BL890c i2 Server Blade
HP Integrity Superdome 2
NOTE: The Fabric Extender Modules (PN AT135A and AT136A) are supported only with HP Integrity Superdome 2.

 

 

****************

 

Comments?