BladeSystem Network Blades
cancel
Showing results for 
Search instead for 
Did you mean: 

FlexAdapters on BL460c G7

Pedals
Occasional Contributor

FlexAdapters on BL460c G7

Hi,

 

Is it possible to use the embedded FlexAdapters on a BL460c G7 blade with a 10GbE pass-through module, is this supported and are there any limitation on doing this?

 

Thanks

 

D

1 REPLY
chuckk281
Trusted Contributor

Re: FlexAdapters on BL460c G7

You can use the FlexAdapters with Pass-Thru modules.

 

You just don't get the FlexNIC capabilities. Each FlexAdapters has 2 modes, Ethernet or Fibre Channel and you need to use the FlexAdapter BIOS to configure it correctly.